#!/usr/bin/env bash
#
# Status bar for dwm. Adapted from:
# https://github.com/w0ng/bin/blob/master/dwm-statusbar
#
# The functions are fairly system-dependent, so it is recommended to copy this file to your ~/bin (or equivalent) and make the adjustments there.

# Colour codes from dwm/config.h
colour_faded="\x01" # grey on black
colour_neutral="\x02" # blue on black
colour_warning="\x03" # yellow on black
colour_critical="\x04" # red on black
colour_normal="\x05" # grey on black

# The amount of spacing to use (or a spacer character, like |)
space="  "

# Time to wait between refreshes, in seconds
refresh="5"

# Name of the network adapters, like enp3s0
eth_adapter=""
wlan_adapter="wlp1s0"

print_date() {
  echo -ne "${colour_normal}$(date "+%d.%m.%y")"
}

print_time() {
  time_local="$(date "+%H:%M")"
  #time_us="$(TZ='US/Central' date "+%H:%M")"
  time_br="$(TZ='America/Sao_Paulo' date "+%H:%M")"

  echo -ne "${colour_neutral}\uE3D2${colour_normal}${time_local}${colour_faded}${time_br}"
  #echo -ne "${colour_neutral}\uE3D2${colour_normal}${time_local}"
}

print_volume() {
  # empty E022, low E023, full E024, mid E03B
  volume=$(amixer get Master -M | tail -n1 | sed -r 's/.*\[(.*)%\].*/\1/')
  mute="$(amixer get Master | tail -n1 | sed -r 's/.*\[(on|off)\].*/\1/')"
  
  if [ "$mute" == "off" ]; then
    vol_colour=$colour_warning
    icon_colour=$colour_warning
    icon="\uE022"
  else
    vol_colour=$colour_normal
    icon_colour=$colour_neutral
    if [ $volume -eq 0 ]; then
      icon="\uE022"
    elif [ $volume -lt 33 ]; then
      icon="\uE023"
    elif [ $volume -lt 66 ]; then
      icon="\uE03B"
    else
      icon="\uE024"
    fi
  fi
  
  echo -ne "${icon_colour}${icon}${vol_colour}${volume}%"
}

# This is very system-dependent
print_backlight() {
  # E3D8
  max_backlight=$(cat /sys/class/backlight/amdgpu_bl1/max_brightness)
  let backlight="100 * $(cat /sys/class/backlight/amdgpu_bl1/brightness) / $max_backlight"

  echo -ne "${colour_neutral}\uE3D8${colour_normal}${backlight}%"
}

# This will probably need tweaking
print_battery() {
  # charging E20D, empty E20E, full E20F, 2/3 E210, 1/3 E211
  # 1 or 0
  ac_status=$(cat /sys/class/power_supply/ACAD/online)
  
  if [ $ac_status -eq 1 ]; then
    icon_colour=$colour_neutral
    if [ -d "/sys/class/power_supply/BAT1" ]; then
      icon="\uE20D"
      bat_colour=$colour_normal
      bat_capacity="$(cat /sys/class/power_supply/BAT1/capacity)%"
    else
      icon="\uE257"
    fi
  else
    bat_capacity=$(cat /sys/class/power_supply/BAT1/capacity)
    if [ $bat_capacity -lt 10 ]; then
      bat_colour=$colour_critical
      icon_colour=$colour_critical
      icon="\uE20E"
    elif [ $bat_capacity -lt 35 ]; then
      bat_colour=$colour_warning
      icon_colour=$colour_warning
      icon="\uE211"
    elif [ $bat_capacity -lt 65 ]; then
      bat_colour=$colour_normal
      icon_colour=$colour_neutral
      icon="\uE1FB"
    elif [ $bat_capacity -lt 85 ]; then
      bat_colour=$colour_normal
      icon_colour=$colour_neutral
      icon="\uE210"
    else
      bat_colour=$colour_normal
      icon_colour=$colour_neutral
      icon="\uE20F"
    fi
    bat_capacity="${bat_capacity}%"
  fi
  
  echo -ne "${icon_colour}${icon}${bat_colour}${bat_capacity}"
}

# This should work out of the box
print_root_free() {
  # floppy E0C3 
  root_free=$(df -kh / | awk 'NR==2 {print $4}')
  root_percent=$(df -kh / | awk 'NR==2 {print $5}' | sed 's/%//g')
  
  if [ $root_percent -gt 90 ]; then
    icon_colour=$colour_critical
    root_colour=$colour_critical
  elif [ $root_percent -gt 75 ]; then
    icon_colour=$colour_warning
    root_colour=$colour_warning
  else
    icon_colour=$colour_neutral
    root_colour=$colour_normal
  fi
  
  echo -ne "${icon_colour}\uE0C3${root_colour}/: ${root_free} (${root_percent}%)"
}

# This should also work out of the box, but only makes sense if your /home is on a different partition
print_home_free() {
  # floppy E0C3 
  home_free=$(df -kh /home | awk 'NR==2 {print $4}')
  home_percent=$(df -kh /home | awk 'NR==2 {print $5}' | sed 's/%//g')
  
  if [ $home_percent -gt 90 ]; then
    icon_colour=$colour_critical
    home_colour=$colour_critical
  elif [ $home_percent -gt 75 ]; then
    icon_colour=$colour_warning
    home_colour=$colour_warning
  else
    icon_colour=$colour_neutral
    home_colour=$colour_normal
  fi
  
  echo -ne "${icon_colour}\uE0C3${home_colour}/home: ${home_free} (${home_percent}%)"
}

# This is highly system-dependent, so use it as a template only
print_shared_free() {
  # floppy E0C3 
  shared_free=$(df -kh /home/eddy/shared | awk 'NR==2 {print $4}')
  shared_percent=$(df -kh /home/eddy/shared | awk 'NR==2 {print $5}' | sed 's/%//g')
  
  if [ $shared_percent -gt 90 ]; then
    icon_colour=$colour_critical
    shared_colour=$colour_critical
  elif [ $shared_percent -gt 75 ]; then
    icon_colour=$colour_warning
    shared_colour=$colour_warning
  else
    icon_colour=$colour_neutral
    shared_colour=$colour_normal
  fi
  
  echo -ne "${icon_colour}\uE0C3${shared_colour}/mnt/shared: ${shared_free} (${shared_percent}%)"
}

# This should work out of the box
print_mem_free() {
  mem_free="$(free -m | awk '/Mem:/ {print $7}')"
  
  mem_colour=$colour_normal
  icon_colour=$colour_neutral
  if [ $mem_free -lt 250 ]; then
    mem_colour=$colour_critical
    icon_colour=$colour_critical
  elif [ $mem_free -lt 500 ]; then
    mem_colour=$colour_warning
    icon_colour=$colour_warning
  fi
  
  echo -ne "${icon_colour}\uE28B${mem_colour}${mem_free}M"
}

# This depends on lm_sensors and will likely need configuring
print_cpu_temp() {
  cpu_temp=$(sensors -u | awk '/edge/ {getline; print $2}' | sed -r 's/([0-9]*)\.[0-9]*/\1/')
  
  temp_colour=$colour_normal
  icon_colour=$colour_neutral
  if [ $cpu_temp -gt 83 ]; then
    temp_colour=$colour_critical
    icon_colour=$colour_critical
  elif [ $cpu_temp -gt 99 ]; then
    temp_colour=$colour_warning
    icon_colour=$colour_warning
  fi
  
  echo -ne "${icon_colour}\uE3B2${temp_colour}${cpu_temp}°"
}

# cpu (from: https://bbs.archlinux.org/viewtopic.php?pid=661641#p661641)
print_cpu_used() {
  echo -ne "${colour_neutral}\uE3AF${colour_normal}${cpu_used}%"
}

# Configure the adapter to display above
print_eth() {
  eth_status=$(ip addr show dev ${eth_adapter} | awk 'NR==1 {print $9}')
  
  if [ "$eth_status" == "UP" ]; then
    eth_ip=$(ip addr show dev ${eth_adapter} | awk 'NR==3 {print $2}' | sed -r 's/\/.*//')
    icon_colour=${colour_neutral}
    eth_colour=${colour_normal}
  else
    icon_colour=${colour_faded}
  fi

  echo -ne "${icon_colour}\uE0E4${eth_colour}${eth_ip}"
}

# Configure the adapter to display above, strength might need to be tweaked
print_wlan() {
  wlan_status=$(ip addr show dev ${wlan_adapter} | awk 'NR==1 {print $9}')
  
  if [ "$wlan_status" == "UP" ]; then
    wlan_ip=$(ip addr show dev ${wlan_adapter} | awk 'NR==3 {print $2}' | sed -r 's/\/.*//')
    
    let wlan_strength="10 * $(cat /proc/net/wireless | awk 'NR==3 {print substr($3, 1, 2)}') / 7"
    if [ $wlan_strength -lt 25 ]; then
      icon_colour=${colour_critical}
      wlan_colour=${colour_critical}
    elif [ $wlan_strength -lt 50 ]; then
      icon_colour=${colour_warning}
      wlan_colour=${colour_warning}
    else
      icon_colour=${colour_neutral}
      wlan_colour=${colour_normal}
    fi
    
    wlan_strength="${wlan_strength}%"

  else
    icon_colour=${colour_faded}
  fi

  echo -ne "${icon_colour}\uE401${wlan_colour}${wlan_ip} ${wlan_strength}"
}

while true; do
  # get new cpu idle and total usage
  eval $(awk '/^cpu /{print "cpu_idle_now=" $5 "; cpu_total_now=" $2+$3+$4+$5 }' /proc/stat)
  cpu_interval=$((cpu_total_now-${cpu_total_old:-0}))
  # calculate cpu usage (%)
  let cpu_used="100 * ($cpu_interval - ($cpu_idle_now-${cpu_idle_old:-0})) / $cpu_interval"

  # Pipe to status bar
  # This is where you can adjust what gets shown by adding the desired function calls
  xsetroot -name "$(print_wlan)${space}$(print_root_free)${space}$(print_home_free)${space}$(print_cpu_used)${space}$(print_cpu_temp)${space}$(print_mem_free)${space}$(print_battery)${space}$(print_backlight)${space}$(print_volume)${space}$(print_time)$(print_date)"

  # reset old rate
  cpu_idle_old=$cpu_idle_now
  cpu_total_old=$cpu_total_now
  
  # loop stats every so many seconds
  sleep "${refresh}"
done